To accelerate breeding improvements of crops such as barley, the agricultural crop breeding company Nordic Seed recently opened its brand-new indoor research facility, which has a full line installment from DGT by Senmatic. Nordic Seeds expects to speed its early stages of the crop breeding process from 3-4 years to just 1 year.
Growing crops depend on the season; some are grown in spring and others in winter – or rather that used to be the case. With its brand-new 2,200 m2 greenhouse, Danish-based agricultural crop breeding company Nordic Seed now grows crops such as barley year-round despite its actual growing season being in winter. In just one calendar year, they expect to grow three to four generations – something which in the field would have lasted three to four years.
The objectives when breeding agricultural crops are most importantly to improve yield potential, resistance to diseases and end use quality. In other words, crop breeding research increases the number of harvested grains per ha. in the fields.
Indoor growth technologies to improve outdoor crops
Being an expert in indoor greenhouse technologies, DGT by Senmatic was hired to deliver an extensive full-line technological solution for the new research facility. The delivery included all electricity installations, climate control, watering and fertilizing mixer, pipes, and ventilation.
"We are highly experienced in custom made and flexible technological horticultural solutions and were hired as full-line supplier of climate, irrigation and fertilization, pipes, and ventilation. With experience from similar research facilities, we were able to guide Nordic Seed throughout the process."
Morten Hjorth Area Sales Manager at DGT by Senmatic
Indoor growth technologies such as watering, fertilizing, climate, ventilation, and humidity can be controlled from the adjacent office space for live monitoring of growth conditions and for data analysis.
Equal growth conditions throughout the greenhouse ensure stability
Creating a greenhouse where each part of the plants’ needs can be controlled gives a homogeneous growth environment means that Nordic Seed is now certain that crops have identical growing conditions throughout the greenhouse – and stability is key when breeding crops, says Jens Due Jensen.
A flexible watering system
For Nordic Seed being able to sectionalize the greenhouse was important. Creating different types of crops to research and analyze the different qualities, meant that they required a flexible watering system, which could be divided into smaller sections.
To fulfil this requirement, DGT by Senmatic installed a watering valve at each table. In industrial greenhouses watering valves typically water 20 tables at a time. This means that they can control one table at a time and control and customize which nutrients, watering times and fertilizing for different crops at different tables and thereby grow a diverse selection of crops much quicker. The precise monitoring gives full flexibility.
The system makes it possible to water with different fertilizer recipes. The recipes are defined from a central computer and are delivered to the chosen table from the mixer. The mixer also controls pH-values. The new greenhouse has a total of 80 tables, two watering strands, two fertilizer tanks and two return water basins.
DGT by Senmatic as partner throughout the process
In the early stages of the extensive project, DGT by Senmatic provided planning and counselling. The building process was initiated by installing all piping and electricity.
From there the technological solutions were installed: the AMI Penta fertilizer mixer, a LCC4 for electronic climate control, sensors to control humidity, temperature and CO2, as well as gear motors and rack-and-pinion vent opening system for ventilation.
AMI Penta Irrigation and fertilizer mixer
Read more about AMI Penta
LCC4 electronic climate control for up to 16 compartments
Read more about LCC4
RTF7-sensor for control of temperature, humidity and CO2
Read more about RTF7
LV7 rack & pinion
Read more about racks and pinions
LG120 Gear motor
Read more about this gear motor
The ultimate climate control for all greenhouses
Greenhouses contain ecosystems that need high-quality climate control to ensure the best growing conditions. The different climate components and processes is most effectively adjusted to one another through electronic climate control. Electronic and automated climate control is relevant for all commercial greenhouses and horticultural setups, as is entails several advantages:
- Increase production output and yield
- Ensure higher crop quality
- Improve efficiency and save resources
- Prevent waste of energy, water, and nutrients
- Improve growing precision through accurate control
- Ensure a minimum of errors with a user-friendly and data-driven climate computer
Precision irrigation and fertilizer mixers
For optimal growing conditions, plants require the right amount of water at the right time. Our irrigation and fertilizer mixers ensure that water is delivered to the plants at exactly the right time, in the right amounts, and with the correct nutrients in the correct proportion, concentration and with the pH value constantly adjusted.
- For precise irrigation and fertilizing
- Almost everything is customizable
- High-precision software
- Can be connected to our LCC Climate Controls using our SuperLink software
- Reuse return water and optimize water resources
Mechanical climate components for optimal ventilation
Ventilation is important for keeping growing conditions in the greenhouse optimal. DGT by Senmatic supplies patented racks and pinions and gear motors covering all voltages, speeds and power sources:
- Low maintenance
- Silent operation
- High performance and flexibility
- Long lifetime
About Nordic Seed
Nordic Seed was founded in 2008 from a merger between Pajbjerg A/S, the Abed Foundation and DLA Agro. Nordic Seed aims to develop high-yielding and healthy cereal and legume varieties for the benefit of agriculture in Denmark and Northern Europe and has a total of 1025 hectares at disposal (2533 acre) for grain processing, variety representation, and seed and grain trade. The company is part of the trading companies Danish Agro and Vestjyllands Andel, which has approximately 5,000 employees and are co-operatively owned by 11,000 Danish farmers.
Want to know more?
Are you interested in learning more about full-scale climate installations? Or are you looking to advance with smaller technologies for now? At DGT by Senmatic, we are experts on both smaller and larger installations, and look forward to talking to you about your opportunities.
You are welcome to contact our sales team - or you can fill in the form below.
