Mobile Bench Irrigation

Flexible irrigation for mobile bench systems

A mobile bench system must enable easy transport of the container benches around in the nursery, for example using conveyor tracks or a crane. To meet this need, DGT by Senmatic has developed an irrigation system specially for the mobile bench system, which makes it possible to move the container benches without consideration for the water installation.

Water filling
A special triangle valve ensures that water filling is carried out in a splash-less jet. The triangle valve is easily mounted with a special bracket on the drain edge. The triangle valve and the special bracket are designed so that the container bench pushes the valve sideways when lifted by a crane, without damaging the valve or the container bench.

For the quick and efficient draining of water, DGT by Senmatic has developed the HV siphon valve. With the built-in final emptying construction, the last of the water is able to run out after the siphon effect has stopped. This is also an advantage if there is a lot of dirt on the benches.

The siphon valve is adjustable in steps for optional water filling height.

Any questions? Our specialists are ready to help!

Contact us

What's in it for you?

Flexible irrigation system

Built-in final emptying construction

Water filling in a splash-less jet

Quick and efficient draining of water

Download product sheet Technical specifications
Download product sheet

Download product sheet

Technical specifications

Iphon valve HV 3

  • Draining: 2.5 - 3 L/min
  • Final emptying: 0.2 L/min
  • Draining height (adjustable): 45 - 60 mm (above sump bottom)
  • Mounting hole in sump: Min. 26 mm - max. 30 mm
  • Mounting thread: 3/4" RG
  • Closing function: Yes
  • Material (valve): Black nylon
  • Weight (total): 50 g (0.11 lb)
  • Length: 100 mm (0.39")

Triangle valve

  • Capacity (recommended): 8 - 14 L/min
  • Water pressure (recommended): 1.3 - 3.3 bar
  • Material: Black nylon
  • Length (complete): 650 mm
  • Weight (complete): Approx. 350 g (0.77 lb) incl. bracket
  • Bracket for mouting on the edge: 90° C - 110° C
  • Resistance tube: Ø 8 x 6 mm (0.3 x 0.23"), 2 m (77")
Find distributor here

Turnkey Solutions from DGT by Senmatic

Get visual information of the different options for a turnkey solution for your greenhouse.