WIND ENERGY
ENSURING RELIABILITY FOR THE WIND ENERGY INDUSTRY
Wind installations are complex setups often operating under extreme conditions. This creates a need for reliable monitoring, precise troubleshooting and competent optimization to ensure efficiency.
To do so, the wind turbine industry needs business partners, who understand the need for high efficiency, maximum reliability, and minimum downtime in installations. With know-how from 20 years of experience in the wind industry, we work with leading players in the industry, designing and manufacturing reliable temperature and humidity sensors for demanding wind power applications.
For further information, you are welcome to contact me:
Keld Reimer Hansen
Key Account Manager and responsible for business for the Wind Energy Industry
Phone: +45 6389 2270 - Email: Send email
Reliable temperature and humidity sensors for the wind industry
Our temperature and humidity sensors are designed to work under extreme operating conditions for both onshore and offshore wind turbines as well as turbines installed in remote sites. Our sensors for the wind power industry consist of:
- Resistance temperature sensors (Pt-100 or Pt-1000) for monitoring outside temperature, control cabinets, transformers, generators, gearboxes, bearings, brakes, and hydraulics.
- Humidity sensors for monitoring of moisture in nacelle or tower.
Read about how to increase revenue by preventing humidity-related issues in wind turbines.
Meeting manufacturability and quality requirements
Producing reliable sensors demands that suppliers meet manufacturability and quality requirements, which is why APQP4Wind and Production Part Approval Process (PPAP) are essential parts of Senmatic’s operations in sensor production. The purpose of PPAP is to establish confidence in suppliers’ production processes, and to demonstrate that manufacturing is able to produce components that meet all requirements during the actual production run.
Core elements of PPAP at Senmatic is Design Failure Mode Effect Analysis (DFMEA) and Process Failure Mode Effect Analysis (PFMEA), where we ensure optimal sensor development and production.
Find the right sensor for your business
If errors or issues arise at a wind farm, they can be extremely costly to investigate and repair as wind farms are typically located offshore or in other areas with limited accessibility. Therefore, even the smallest of irregularities or errors can be critical and lead to significant losses. For a setup to be profitable and safe, error rates need to be minimized. Reliable sensors play an essential role in creating high efficiency, maximum reliability, and minimum downtime.
In the list at left you can find all our sensors suitable for the wind industry.
DIN-standardized RTD sensors with Pt- resistors
-
For low pressure environments
-
For high pressure environments
-
Measuring inserts
Type B
Extension length/ exchangeable insert
Type BF
With fixed insert
Type DW
Weld-in thermometer
Type HMI60
Measuring insert
Type HMI80
Measuring insert
Type MI60
Measuring insert
Type MI80
Measuring insert
Type ML
Thermocouple mineral-insulated
Type PTE
Wire sensor
Type PTR
Thermometer - classified
DIN-standardized thermocouples
-
For low / high pressure environments
-
Measuring inserts
-
Mineral insulated thermo sensors for diesel engines
-
classified thermo sensors
Type AKK
High temperature thermocouple
Type AMK
High temperature thermocouple
Type MF
Thermocouple mineral-insulated
Type MK
Thermocouple wire w/bayonet
Type ML
Thermocouple mineral-insulated
Type TB
Thermocouple w/exchangeable insert
Type TBJ
Thermocouple wire w/bayonet
Type TDMH
Thermocouple - Classified
Type TMI60
Measuring insert
Type TMI80
Measuring insert
Type TMMI
Measuring insert - Mineral-insulated
Marine classified sensors with Pt-resistors, Thermocouples and NTC thermistors - also available as customized.
The sensors are marine approved by DNV-GL, Bureau Veritas and
DNV-GL EU RO MR
Type B
Extension length/ exchangeable insert
Type BF
With fixed insert
Type BJ
Cable sensor with Bayonet
Type MK
Thermocouple wire w/bayonet
Type PMK
Thermocouple mineral-insulated
Type PTE
Wire sensor
Type PTR
Thermometer - classified
Type TDMH
Thermocouple - Classified
Wire sensors with Pt-resistors and NTC-thermistors
Type BJ
Cable sensor with Bayonet
Type MK
Thermocouple wire w/bayonet
Type ML
Thermocouple mineral-insulated
Type PMK
Thermocouple mineral-insulated
Type PTE
Wire sensor
Type PV
Wire sensor with angle bending
Type SGN
Mini sensor / fast response
Tank temperature sensors
-
Multi-, average and single spot sensors
-
Ex types
Type NLI
Multi-spot thermometer
Type WLS
Water Level Sensor
Mineral insulated sensors
Type MF
Thermocouple mineral-insulated
Type MK
Thermocouple wire w/bayonet
Type ML
Thermocouple mineral-insulated
Type PMK
Thermocouple mineral-insulated
Type TDMH
Thermocouple - Classified
Type TMMI
Measuring insert - Mineral-insulated
Sensors for hygienic use
Type SGN
Mini sensor / fast response
Thermowells & Transmitters
Type ISL
Weld-in thermowell
Type LDW
Weld-in thermowell
Type LOE
Thermowell w/relief screw
Type LOF
Thermowell with fixed thread
Type LOK
Thermowell w/clamping ring
Type LOL
Thermowell with rotable union
Type LOS
Thermowell w/relief screw
Transmitters
For any purpose
Calibration
Calibration
Traceable to ITS-90 and EN60751
Here you can find all the products suitable for the Power Industry
Type AKK
High temperature thermocouple
Type AMK
High temperature thermocouple
Type B
Extension length/ exchangeable insert
Type BF
With fixed insert
Type BJ
Cable sensor with Bayonet
Calibration
Traceable to ITS-90 and EN60751
Type DW
Weld-in thermometer
Type HMI60
Measuring insert
Type HMI80
Measuring insert
Type ISL
Weld-in thermowell
Type LDW
Weld-in thermowell
Type LOE
Thermowell w/relief screw
Type LOF
Thermowell with fixed thread
Type LOK
Thermowell w/clamping ring
Type LOL
Thermowell with rotable union
Type LOS
Thermowell w/relief screw
Type MI60
Measuring insert
Type MI80
Measuring insert
Type MF
Thermocouple mineral-insulated
Type MK
Thermocouple wire w/bayonet
Type ML
Thermocouple mineral-insulated
Type NLI
Multi-spot thermometer
Type PMK
Thermocouple mineral-insulated
Type PTE
Wire sensor
Type PTR
Thermometer - classified
Type PV
Wire sensor with angle bending
Type SGN
Mini sensor / fast response
Type TB
Thermocouple w/exchangeable insert
Type TBJ
Thermocouple wire w/bayonet
Type TDMH
Thermocouple - Classified
Type TMI60
Measuring insert
Type TMI80
Measuring insert
Type TMMI
Measuring insert - Mineral-insulated
Transmitters
For any purpose
Type WLS
Water Level Sensor
