Temperature sensor type PTE

Type PTE

Cable sensor

  • Straight thermometer for measurement of temperatures in pipe-lines and containers, mounted in immersion wells, on the outside of pipelines, in gases and in machinery, e.g. in connection with bearings, in the LOW-PRESSURE RANGE.
  • The measuring insert is according to IEC 751.
  • The protective sheath is standard of Ø6×0.5 mm stainless steel, AISI 316.
  • The connecting cable is standard available in PVC and silicone.
  • The standard is without connection. (compression fitting available on request).
  • Response time (mean values) measured at velocities in:
    water at 0.4 m/s: t0.5 = 10 sec. - t 0.9 = 42 sec.
    air at 3.0 m/s:     t0.5 = 24 sec.
  • Recommended measuring current:  max. 2 mA.
  • Approvals: DNV-GL, Bureau Veritas, DNV-GL EU RO MR.


Contact us for more information

See all Resistance Sensors

Go to product group

See all Thermistors

Go to product group

See all sensor types in alphabetical order

Go to all types

See all product groups

Go to all groups